Bow window replacement rebuilds the curved multi-unit assembly that projects outward from a wall, and it is the service South Jordan homeowners ask for when sashes fog, seals fail, or the head board begins to sag. Many two-story homes and older brick ranches around South Jordan were built with four- to six-lite bow assemblies that now struggle with seal failure and drafty mullion joints after years of Salt Lake Valley temperature swings.
Our crews handle the full sequence, from radius framing and support bracket reinforcement to insulated glazing units, flashing, and interior trim finishing. Scheduling stays open through 2026, including cooler-weather installs that are planned around your day. One visit, clearly explained.
Call Us: 385-537-0806
Bow Window Replacement Overview
Bow window replacement is the process of removing a curved, multi-sash window assembly and installing new units within a reinforced radius frame, and at South Jordan Window Replacement it includes measurement, structural support review, glazing installation, flashing, and finish trim across South Jordan properties. Field measurements come first, since each bow projects at a set angle and every lite must match the curve before ordering. Crews then check the head board and support brackets, replace deteriorated framing members, and set insulated glazing units with new sill pans and continuous flashing to keep water moving away from the wall. Sealant joints, mullion covers, and interior casing complete the installation. We work on single-family homes, townhomes, multi-unit buildings, and small commercial storefronts throughout the area. Our 2026 scheduling approach keeps things simple: a fast written estimate, a confirmed arrival window, protective covering over floors and furnishings, and a tidy work area at the end of each visit. Communication stays direct from the first call through the final walkthrough, so you always know what happens next.
Call Us On: 385-537-0806
Trusted Bow Window Specialists
South Jordan homeowners choose our team for bow window replacement because curved assemblies demand exact radius measurements, verified structural support, and a documented installation sequence rather than a quick swap of glass. Each project starts with templating the existing curve and confirming the head board, cable support, and roof or seat board condition before any unit is ordered. That step prevents the sagging and racking that show up when a bow is set without proper reinforcement.
Every quote arrives as a written estimate with the unit specifications, glazing package, and flashing details listed line by line. Crews document conditions with before-and-after photos, confirm arrival windows the day prior, and finish with a post-job walkthrough covering sash operation, weatherstripping, and sealant lines. Follow-up checks can be scheduled at your convenience.
Through 2026, we keep the calendar flexible for South Jordan homeowners and property managers who need work done around family routines or tenant schedules. Coordination stays organized, so a bow window install rarely takes more of your day than it should. Questions get answered by the same team handling your project, and ongoing maintenance guidance is provided in plain language you can act on.
Call 385-537-0806Booking starts with a short phone or email conversation that captures the opening size, current frame condition, and your preferred visit window. During the on-site assessment we measure the rough opening, check the header and seat board for moisture damage, and evaluate the existing mullion angles. You receive a written estimate that lists glazing options, frame material, and projected timeline. No guesswork on pricing.
Once the estimate is approved, we help select the sash configuration, low-E glass package, and frame material suited to South Jordan temperature swings. Bow windows use four to six equal sashes on a curved radius, so the arc and projection depth must be confirmed before ordering. We document the specifications in writing and share expected lead times so scheduling stays predictable for homeowners and property managers alike.
Crews arrive within the confirmed time window and protect flooring, sills, and landscaping before any demolition begins. Interior trim and casing are removed carefully, followed by the old sashes and frame. We inspect the sill plate, cripple studs, and any cantilevered support brackets for rot or settling. Findings are reported to you before installation continues.
The new bow assembly is set into the opening, shimmed level and plumb, then anchored through the jambs at manufacturer-specified points. Support cables or knee brackets are installed when the unit projects beyond the wall line. Each sash is checked for even reveal and smooth operation. Flashing, sill pan, and backer rod go in next, followed by low-expansion foam and exterior sealant to block air infiltration.
Interior trim, seat board, and casing are reinstalled or replaced to match existing millwork, then caulked and touched up. All debris, packaging, and old materials leave with the crew the same day. We finish with a post-job walkthrough where you operate every sash, review the locking hardware, and receive care instructions plus warranty paperwork in writing.
// Bow Window Replacement Cost Factors //
Bow Window Replacement FAQs
Most single bow window replacements are completed in one to two working days, since the curved frame is assembled from multiple sashes joined at angled mullions and then set as one unit. Structural work such as a new head board or seat board can add time. We confirm the working window in your written estimate so you can plan around the visit.
A bow window replacement includes removal of the old unit, inspection of the rough opening and support brackets, installation of the new multi-sash curved assembly, insulation and flashing at the head and sill, and interior and exterior trim finishing. Seat board or interior extension jambs are quoted separately when your design calls for them. Every job ends with a walkthrough so you can review sash operation and caulk lines before we pack up.
Clearing roughly three to four feet of floor space in front of the bow window and removing plants, shelving, and window seat cushions is all we typically ask. Our crews lay drop cloths and protect flooring, and we let you know the arrival window ahead of time so the interruption stays short. If the unit sits above a stairwell or landing, mention it when scheduling so we can plan access.
Bow windows cost more because you are replacing three to five individual sashes tied together with curved mullions, plus the head and seat board, exterior roof cap, and support bracketry that a flat opening does not require. Glass package choices such as low-E coatings and argon fill also shift the total. We measure the projection and radius on site, then give you a written, itemized estimate before any work is scheduled.
South Jordan’s freeze-thaw cycles and heavy snow load put real stress on a bow window’s projecting roof cap and its seals, which is why failed insulating glass units and sagging support cables are common local complaints. Installation continues through the colder months in 2026 using cold-weather sealants and staged removal so the opening is never left open for long. For South Jordan homes with west-facing bows, we often recommend a low-E glass package to cut summer heat gain as well.
Free Bow Window Estimates
Ready to move forward on your bow window project? Our team provides free written estimates that outline frame materials, glazing packages, seat board options, and installation timing, so you can compare details without pressure or obligation. Scheduling stays simple: pick a visit time that fits your week, and we confirm arrival windows ahead of the appointment. South Jordan homeowners planning updates for 2026 often book measurements early, which keeps custom unit ordering and install dates on a predictable track. Call or email today to request your estimate and reserve a measurement visit.
Request Your Free Estimate 385-537-0806